Type Alias PresetShapeAdjustments

The adjustments of each preset shape that has them, by shape type.

Angles are measured clockwise from 3 o'clock. Word keeps each value within the range the shape allows, so a value that is too large acts like the largest allowed value.

Public Api

type PresetShapeAdjustments = {
    arc: { endAngle?: number; startAngle?: number };
    bentArrow: {
        bendRadius?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    bentLineCallout: {
        bendX?: number;
        bendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    bentLineCalloutWithAccentBar: {
        bendX?: number;
        bendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    bentLineCalloutWithBorderAndAccentBar: {
        bendX?: number;
        bendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    bentLineCalloutWithNoBorder: {
        bendX?: number;
        bendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    bentUpArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    beveledRectangle: { bevelWidth?: number };
    blockArc: { endAngle?: number; startAngle?: number; thickness?: number };
    bracePair: { curveRadius?: number };
    bracketPair: { cornerRadius?: number };
    chevron: { pointLength?: number };
    chord: { endAngle?: number; startAngle?: number };
    circularArrow: {
        endAngle?: number;
        headAngle?: number;
        headWidth?: number;
        shaftThickness?: number;
        startAngle?: number;
    };
    cloudCallout: { pointerX?: number; pointerY?: number };
    cross: { cornerSize?: number };
    cube: { depth?: number };
    curvedConnector: { bendX?: number };
    curvedConnectorFourBends: {
        firstBendX?: number;
        secondBendY?: number;
        thirdBendX?: number;
    };
    curvedConnectorThreeBends: { firstBendX?: number; secondBendY?: number };
    curvedDownArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    curvedLeftArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    curvedRibbonDown: {
        centerWidth?: number;
        curveDepth?: number;
        thickness?: number;
    };
    curvedRibbonUp: {
        centerWidth?: number;
        curveDepth?: number;
        thickness?: number;
    };
    curvedRightArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    curvedUpArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    cylinder: { topHeight?: number };
    diagonalRoundedCornersRectangle: {
        topLeftBottomRightRadius?: number;
        topRightBottomLeftRadius?: number;
    };
    diagonalSnippedCornersRectangle: {
        topLeftBottomRightSize?: number;
        topRightBottomLeftSize?: number;
    };
    diagonalStripe: { stripeWidth?: number };
    donut: { thickness?: number };
    doubleBentLineCallout: {
        firstBendX?: number;
        firstBendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
        secondBendX?: number;
        secondBendY?: number;
    };
    doubleBentLineCalloutWithAccentBar: {
        firstBendX?: number;
        firstBendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
        secondBendX?: number;
        secondBendY?: number;
    };
    doubleBentLineCalloutWithBorderAndAccentBar: {
        firstBendX?: number;
        firstBendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
        secondBendX?: number;
        secondBendY?: number;
    };
    doubleBentLineCalloutWithNoBorder: {
        firstBendX?: number;
        firstBendY?: number;
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
        secondBendX?: number;
        secondBendY?: number;
    };
    doubleWave: { skew?: number; waveHeight?: number };
    downArrow: { headLength?: number; shaftThickness?: number };
    downArrowCallout: {
        boxHeight?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    elbowConnector: { bendX?: number };
    elbowConnectorFourBends: {
        firstBendX?: number;
        secondBendY?: number;
        thirdBendX?: number;
    };
    elbowConnectorThreeBends: { firstBendX?: number; secondBendY?: number };
    ellipticalCallout: { pointerX?: number; pointerY?: number };
    foldedCorner: { foldSize?: number };
    frame: { thickness?: number };
    gear6: { toothHeight?: number; toothWidth?: number };
    gear9: { toothHeight?: number; toothWidth?: number };
    halfFrame: {
        horizontalArmThickness?: number;
        verticalArmThickness?: number;
    };
    hexagon: { pointLength?: number };
    horizontalScroll: { rollSize?: number };
    leftArrow: { headLength?: number; shaftThickness?: number };
    leftArrowCallout: {
        boxWidth?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    leftBrace: { curveHeight?: number; pointPosition?: number };
    leftBracket: { cornerHeight?: number };
    leftCircularArrow: {
        endAngle?: number;
        headAngle?: number;
        headWidth?: number;
        shaftThickness?: number;
        startAngle?: number;
    };
    leftRightArrow: { headLength?: number; shaftThickness?: number };
    leftRightArrowCallout: {
        boxWidth?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    leftRightCircularArrow: {
        endAngle?: number;
        headAngle?: number;
        headWidth?: number;
        shaftThickness?: number;
        startAngle?: number;
    };
    leftRightRibbon: {
        endLength?: number;
        thickness?: number;
        verticalOffset?: number;
    };
    leftRightUpArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    leftUpArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    lineCallout: {
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    lineCalloutWithAccentBar: {
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    lineCalloutWithBorderAndAccentBar: {
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    lineCalloutWithNoBorder: {
        lineEndX?: number;
        lineEndY?: number;
        lineStartX?: number;
        lineStartY?: number;
    };
    lShape: { horizontalArmThickness?: number; verticalArmThickness?: number };
    mathDivide: { dotRadius?: number; gap?: number; thickness?: number };
    mathEqual: { gap?: number; thickness?: number };
    mathMinus: { thickness?: number };
    mathMultiply: { thickness?: number };
    mathNotEqual: { gap?: number; slashAngle?: number; thickness?: number };
    mathPlus: { thickness?: number };
    moon: { thickness?: number };
    nonIsoscelesTrapezoid: { leftSlant?: number; rightSlant?: number };
    noSymbol: { thickness?: number };
    notchedRightArrow: { headLength?: number; shaftThickness?: number };
    octagon: { cornerSize?: number };
    parallelogram: { slant?: number };
    pentagonArrow: { pointLength?: number };
    pie: { endAngle?: number; startAngle?: number };
    plaque: { cornerRadius?: number };
    quadArrow: {
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    quadArrowCallout: {
        boxSize?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    rectangularCallout: { pointerX?: number; pointerY?: number };
    ribbonDown: { centerWidth?: number; endOffset?: number };
    ribbonUp: { centerWidth?: number; endOffset?: number };
    rightArrow: { headLength?: number; shaftThickness?: number };
    rightArrowCallout: {
        boxWidth?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    rightBrace: { curveHeight?: number; pointPosition?: number };
    rightBracket: { cornerHeight?: number };
    roundedAndSnippedCornersRectangle: {
        roundedCornerRadius?: number;
        snippedCornerSize?: number;
    };
    roundedCornerRectangle: { cornerRadius?: number };
    roundedRectangle: { cornerRadius?: number };
    roundedRectangularCallout: {
        cornerRadius?: number;
        pointerX?: number;
        pointerY?: number;
    };
    smileyFace: { smile?: number };
    snippedCornerRectangle: { cornerSize?: number };
    star10: { innerRadius?: number };
    star12: { innerRadius?: number };
    star16: { innerRadius?: number };
    star24: { innerRadius?: number };
    star32: { innerRadius?: number };
    star4: { innerRadius?: number };
    star5: { innerRadius?: number };
    star6: { innerRadius?: number };
    star7: { innerRadius?: number };
    star8: { innerRadius?: number };
    stripedRightArrow: { headLength?: number; shaftThickness?: number };
    sun: { rayLength?: number };
    swooshArrow: { headLength?: number; shaftThickness?: number };
    teardrop: { pointLength?: number };
    topRoundedCornersRectangle: {
        bottomCornerRadius?: number;
        topCornerRadius?: number;
    };
    topSnippedCornersRectangle: {
        bottomCornerSize?: number;
        topCornerSize?: number;
    };
    trapezoid: { slant?: number };
    triangle: { apexPosition?: number };
    upArrow: { headLength?: number; shaftThickness?: number };
    upArrowCallout: {
        boxHeight?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    upDownArrow: { headLength?: number; shaftThickness?: number };
    upDownArrowCallout: {
        boxHeight?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
    };
    uTurnArrow: {
        bendRadius?: number;
        headLength?: number;
        headWidth?: number;
        shaftThickness?: number;
        tipPosition?: number;
    };
    verticalScroll: { rollSize?: number };
    wave: { skew?: number; waveHeight?: number };
}

Index

Properties

arc bentArrow bentLineCallout bentLineCalloutWithAccentBar bentLineCalloutWithBorderAndAccentBar bentLineCalloutWithNoBorder bentUpArrow beveledRectangle blockArc bracePair bracketPair chevron chord circularArrow cloudCallout cross cube curvedConnector curvedConnectorFourBends curvedConnectorThreeBends curvedDownArrow curvedLeftArrow curvedRibbonDown curvedRibbonUp curvedRightArrow curvedUpArrow cylinder diagonalRoundedCornersRectangle diagonalSnippedCornersRectangle diagonalStripe donut doubleBentLineCallout doubleBentLineCalloutWithAccentBar doubleBentLineCalloutWithBorderAndAccentBar doubleBentLineCalloutWithNoBorder doubleWave downArrow downArrowCallout elbowConnector elbowConnectorFourBends elbowConnectorThreeBends ellipticalCallout foldedCorner frame gear6 gear9 halfFrame hexagon horizontalScroll leftArrow leftArrowCallout leftBrace leftBracket leftCircularArrow leftRightArrow leftRightArrowCallout leftRightCircularArrow leftRightRibbon leftRightUpArrow leftUpArrow lineCallout lineCalloutWithAccentBar lineCalloutWithBorderAndAccentBar lineCalloutWithNoBorder lShape mathDivide mathEqual mathMinus mathMultiply mathNotEqual mathPlus moon nonIsoscelesTrapezoid noSymbol notchedRightArrow octagon parallelogram pentagonArrow pie plaque quadArrow quadArrowCallout rectangularCallout ribbonDown ribbonUp rightArrow rightArrowCallout rightBrace rightBracket roundedAndSnippedCornersRectangle roundedCornerRectangle roundedRectangle roundedRectangularCallout smileyFace snippedCornerRectangle star10 star12 star16 star24 star32 star4 star5 star6 star7 star8 stripedRightArrow sun swooshArrow teardrop topRoundedCornersRectangle topSnippedCornersRectangle trapezoid triangle upArrow upArrowCallout upDownArrow upDownArrowCallout uTurnArrow verticalScroll wave

Properties

`Readonly`arc

arc: { endAngle?: number; startAngle?: number }

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the arc ends, in degrees clockwise from 3 o'clock. Default 0
Optional ReadonlystartAngle?: number

Angle where the arc starts, in degrees clockwise from 3 o'clock. Default 270

`Readonly`bentArrow

bentArrow: {
    bendRadius?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlybendRadius?: number

Outer radius of the bend, as a percent of the shorter side. Default 43.75
Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`bentLineCallout

bentLineCallout: {
    bendX?: number;
    bendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlybendX?: number

Bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlybendY?: number

Bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -46.667
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`bentLineCalloutWithAccentBar

bentLineCalloutWithAccentBar: {
    bendX?: number;
    bendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlybendX?: number

Bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlybendY?: number

Bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -46.667
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`bentLineCalloutWithBorderAndAccentBar

bentLineCalloutWithBorderAndAccentBar: {
    bendX?: number;
    bendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlybendX?: number

Bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlybendY?: number

Bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -46.667
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`bentLineCalloutWithNoBorder

bentLineCalloutWithNoBorder: {
    bendX?: number;
    bendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlybendX?: number

Bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlybendY?: number

Bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -46.667
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`bentUpArrow

bentUpArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`beveledRectangle

beveledRectangle: { bevelWidth?: number }

Type Declaration

Optional ReadonlybevelWidth?: number

Width of the bevelled edge, as a percent of the shorter side. Default 12.5

`Readonly`blockArc

blockArc: { endAngle?: number; startAngle?: number; thickness?: number }

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the arc ends, in degrees clockwise from 3 o'clock. Default 0
Optional ReadonlystartAngle?: number

Angle where the arc starts, in degrees clockwise from 3 o'clock. Default 180
Optional Readonlythickness?: number

Thickness of the arc, as a percent of the shorter side. Default 25

`Readonly`bracePair

bracePair: { curveRadius?: number }

Type Declaration

Optional ReadonlycurveRadius?: number

Radius of the curves in the braces, as a percent of the shorter side. Default 8.333

`Readonly`bracketPair

bracketPair: { cornerRadius?: number }

Type Declaration

Optional ReadonlycornerRadius?: number

Radius of the corners of the brackets, as a percent of the shorter side. Default 16.667

`Readonly`chevron

chevron: { pointLength?: number }

Type Declaration

Optional ReadonlypointLength?: number

Length of the point, as a percent of the shorter side. Default 50

`Readonly`chord

chord: { endAngle?: number; startAngle?: number }

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the chord ends, in degrees clockwise from 3 o'clock. Default 270
Optional ReadonlystartAngle?: number

Angle where the chord starts, in degrees clockwise from 3 o'clock. Default 45

`Readonly`circularArrow

circularArrow: {
    endAngle?: number;
    headAngle?: number;
    headWidth?: number;
    shaftThickness?: number;
    startAngle?: number;
}

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the arrow ends, in degrees clockwise from 3 o'clock. Default 340.961
Optional ReadonlyheadAngle?: number

Angle the arrowhead covers, in degrees. Default 19.039
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyshaftThickness?: number

Thickness of the arrow's body, as a percent of the shorter side. Default 12.5
Optional ReadonlystartAngle?: number

Angle where the arrow starts, in degrees clockwise from 3 o'clock. Default 180

`Readonly`cloudCallout

cloudCallout: { pointerX?: number; pointerY?: number }

Type Declaration

Optional ReadonlypointerX?: number

Tip of the pointer, from the centre, as a percent of the width. Negative values are to the left. Default -20.833
Optional ReadonlypointerY?: number

Tip of the pointer, from the centre, as a percent of the height. Negative values are above the centre. Default 62.5

`Readonly`cross

cross: { cornerSize?: number }

Type Declaration

Optional ReadonlycornerSize?: number

Size of the cut-away corners, as a percent of the shorter side. Larger values make thinner arms. Default 25

`Readonly`cube

cube: { depth?: number }

Type Declaration

Optional Readonlydepth?: number

Depth of the top and side faces, as a percent of the shorter side. Default 25

`Readonly`curvedConnector

curvedConnector: { bendX?: number }

Type Declaration

Optional ReadonlybendX?: number

Where the connector bends, from the left edge, as a percent of the width. Default 50

`Readonly`curvedConnectorFourBends

curvedConnectorFourBends: {
    firstBendX?: number;
    secondBendY?: number;
    thirdBendX?: number;
}

Type Declaration

Optional ReadonlyfirstBendX?: number

Where the connector first bends, from the left edge, as a percent of the width. Default 50
Optional ReadonlysecondBendY?: number

Where the connector bends a second time, from the top edge, as a percent of the height. Default 50
Optional ReadonlythirdBendX?: number

Where the connector bends a third time, from the left edge, as a percent of the width. Default 50

`Readonly`curvedConnectorThreeBends

curvedConnectorThreeBends: { firstBendX?: number; secondBendY?: number }

Type Declaration

Optional ReadonlyfirstBendX?: number

Where the connector first bends, from the left edge, as a percent of the width. Default 50
Optional ReadonlysecondBendY?: number

Where the connector bends a second time, from the top edge, as a percent of the height. Default 50

`Readonly`curvedDownArrow

curvedDownArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`curvedLeftArrow

curvedLeftArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`curvedRibbonDown

curvedRibbonDown: {
    centerWidth?: number;
    curveDepth?: number;
    thickness?: number;
}

Type Declaration

Optional ReadonlycenterWidth?: number

Width of the centre section, as a percent of the width. Default 50
Optional ReadonlycurveDepth?: number

How far the ribbon curves, as a percent of the height. Default 12.5
Optional Readonlythickness?: number

Thickness of the ribbon, as a percent of the height. Default 25

`Readonly`curvedRibbonUp

curvedRibbonUp: {
    centerWidth?: number;
    curveDepth?: number;
    thickness?: number;
}

Type Declaration

Optional ReadonlycenterWidth?: number

Width of the centre section, as a percent of the width. Default 50
Optional ReadonlycurveDepth?: number

How far the ribbon curves, as a percent of the height. Default 12.5
Optional Readonlythickness?: number

Thickness of the ribbon, as a percent of the height. Default 25

`Readonly`curvedRightArrow

curvedRightArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`curvedUpArrow

curvedUpArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`cylinder

cylinder: { topHeight?: number }

Type Declaration

Optional ReadonlytopHeight?: number

Height of the elliptical top, as a percent of the shorter side. Default 25

`Readonly`diagonalRoundedCornersRectangle

diagonalRoundedCornersRectangle: {
topLeftBottomRightRadius?: number;
topRightBottomLeftRadius?: number;
}

Type Declaration

Optional ReadonlytopLeftBottomRightRadius?: number

Radius of the top-left and bottom-right corners, as a percent of the shorter side. Default 16.667
Optional ReadonlytopRightBottomLeftRadius?: number

Radius of the top-right and bottom-left corners, as a percent of the shorter side. Default 0

`Readonly`diagonalSnippedCornersRectangle

diagonalSnippedCornersRectangle: {
topLeftBottomRightSize?: number;
topRightBottomLeftSize?: number;
}

Type Declaration

Optional ReadonlytopLeftBottomRightSize?: number

Size of the cut top-left and bottom-right corners, as a percent of the shorter side. Default 0
Optional ReadonlytopRightBottomLeftSize?: number

Size of the cut top-right and bottom-left corners, as a percent of the shorter side. Default 16.667

`Readonly`diagonalStripe

diagonalStripe: { stripeWidth?: number }

Type Declaration

Optional ReadonlystripeWidth?: number

How much of the top and left edges the stripe covers, as a percent of the width and height. Default 50

`Readonly`donut

donut: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the ring, as a percent of the shorter side. Default 25

`Readonly`doubleBentLineCallout

doubleBentLineCallout: {
    firstBendX?: number;
    firstBendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
    secondBendX?: number;
    secondBendY?: number;
}

Type Declaration

Optional ReadonlyfirstBendX?: number

First bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlyfirstBendY?: number

First bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.963
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlysecondBendX?: number

Second bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlysecondBendY?: number

Second bend in the callout line, from the top edge, as a percent of the height. Default 100

`Readonly`doubleBentLineCalloutWithAccentBar

doubleBentLineCalloutWithAccentBar: {
    firstBendX?: number;
    firstBendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
    secondBendX?: number;
    secondBendY?: number;
}

Type Declaration

Optional ReadonlyfirstBendX?: number

First bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlyfirstBendY?: number

First bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.963
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlysecondBendX?: number

Second bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlysecondBendY?: number

Second bend in the callout line, from the top edge, as a percent of the height. Default 100

`Readonly`doubleBentLineCalloutWithBorderAndAccentBar

doubleBentLineCalloutWithBorderAndAccentBar: {
    firstBendX?: number;
    firstBendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
    secondBendX?: number;
    secondBendY?: number;
}

Type Declaration

Optional ReadonlyfirstBendX?: number

First bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlyfirstBendY?: number

First bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.963
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlysecondBendX?: number

Second bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlysecondBendY?: number

Second bend in the callout line, from the top edge, as a percent of the height. Default 100

`Readonly`doubleBentLineCalloutWithNoBorder

doubleBentLineCalloutWithNoBorder: {
    firstBendX?: number;
    firstBendY?: number;
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
    secondBendX?: number;
    secondBendY?: number;
}

Type Declaration

Optional ReadonlyfirstBendX?: number

First bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlyfirstBendY?: number

First bend in the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.963
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75
Optional ReadonlysecondBendX?: number

Second bend in the callout line, from the left edge, as a percent of the width. Default -16.667
Optional ReadonlysecondBendY?: number

Second bend in the callout line, from the top edge, as a percent of the height. Default 100

`Readonly`doubleWave

doubleWave: { skew?: number; waveHeight?: number }

Type Declaration

Optional Readonlyskew?: number

Shifts the waves sideways, as a percent of the width, from -10 to 10. Default 0
Optional ReadonlywaveHeight?: number

Height of the waves, as a percent of the height. Default 6.25

`Readonly`downArrow

downArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the width. Default 50

`Readonly`downArrowCallout

downArrowCallout: {
    boxHeight?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxHeight?: number

Height of the box, as a percent of the height. Default 64.977
Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`elbowConnector

elbowConnector: { bendX?: number }

Type Declaration

Optional ReadonlybendX?: number

Where the connector bends, from the left edge, as a percent of the width. Default 50

`Readonly`elbowConnectorFourBends

elbowConnectorFourBends: {
    firstBendX?: number;
    secondBendY?: number;
    thirdBendX?: number;
}

Type Declaration

Optional ReadonlyfirstBendX?: number

Where the connector first bends, from the left edge, as a percent of the width. Default 50
Optional ReadonlysecondBendY?: number

Where the connector bends a second time, from the top edge, as a percent of the height. Default 50
Optional ReadonlythirdBendX?: number

Where the connector bends a third time, from the left edge, as a percent of the width. Default 50

`Readonly`elbowConnectorThreeBends

elbowConnectorThreeBends: { firstBendX?: number; secondBendY?: number }

Type Declaration

Optional ReadonlyfirstBendX?: number

Where the connector first bends, from the left edge, as a percent of the width. Default 50
Optional ReadonlysecondBendY?: number

Where the connector bends a second time, from the top edge, as a percent of the height. Default 50

`Readonly`ellipticalCallout

ellipticalCallout: { pointerX?: number; pointerY?: number }

Type Declaration

Optional ReadonlypointerX?: number

Tip of the pointer, from the centre, as a percent of the width. Negative values are to the left. Default -20.833
Optional ReadonlypointerY?: number

Tip of the pointer, from the centre, as a percent of the height. Negative values are above the centre. Default 62.5

`Readonly`foldedCorner

foldedCorner: { foldSize?: number }

Type Declaration

Optional ReadonlyfoldSize?: number

Size of the folded corner, as a percent of the shorter side. Default 16.667

`Readonly`frame

frame: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the frame, as a percent of the shorter side. Default 12.5

`Readonly`gear6

gear6: { toothHeight?: number; toothWidth?: number }

Type Declaration

Optional ReadonlytoothHeight?: number

Height of the teeth, as a percent of the shorter side. Default 15
Optional ReadonlytoothWidth?: number

Width of the top of each tooth, as a percent of the shorter side. Default 3.526

`Readonly`gear9

gear9: { toothHeight?: number; toothWidth?: number }

Type Declaration

Optional ReadonlytoothHeight?: number

Height of the teeth, as a percent of the shorter side. Default 10
Optional ReadonlytoothWidth?: number

Width of the top of each tooth, as a percent of the shorter side. Default 1.763

`Readonly`halfFrame

halfFrame: { horizontalArmThickness?: number; verticalArmThickness?: number }

Type Declaration

Optional ReadonlyhorizontalArmThickness?: number

Thickness of the horizontal arm, as a percent of the shorter side. Default 33.333
Optional ReadonlyverticalArmThickness?: number

Thickness of the vertical arm, as a percent of the shorter side. Default 33.333

`Readonly`hexagon

hexagon: { pointLength?: number }

Type Declaration

Optional ReadonlypointLength?: number

How far the left and right points stick out, as a percent of the shorter side. Default 25

`Readonly`horizontalScroll

horizontalScroll: { rollSize?: number }

Type Declaration

Optional ReadonlyrollSize?: number

Size of the rolled ends, as a percent of the shorter side. Default 12.5

`Readonly`leftArrow

leftArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the height. Default 50

`Readonly`leftArrowCallout

leftArrowCallout: {
    boxWidth?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxWidth?: number

Width of the box, as a percent of the width. Default 64.977
Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`leftBrace

leftBrace: { curveHeight?: number; pointPosition?: number }

Type Declaration

Optional ReadonlycurveHeight?: number

Height of the curves, as a percent of the shorter side. Default 8.333
Optional ReadonlypointPosition?: number

Where the middle point is, from the top, as a percent of the height. Default 50

`Readonly`leftBracket

leftBracket: { cornerHeight?: number }

Type Declaration

Optional ReadonlycornerHeight?: number

Height of the curved corners, as a percent of the shorter side. Default 8.333

`Readonly`leftCircularArrow

leftCircularArrow: {
    endAngle?: number;
    headAngle?: number;
    headWidth?: number;
    shaftThickness?: number;
    startAngle?: number;
}

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the arrow ends, in degrees clockwise from 3 o'clock. Default 19.039
Optional ReadonlyheadAngle?: number

Angle the arrowhead covers, in degrees. Negative, because the arrow turns anticlockwise. Default -19.039
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyshaftThickness?: number

Thickness of the arrow's body, as a percent of the shorter side. Default 12.5
Optional ReadonlystartAngle?: number

Angle where the arrow starts, in degrees clockwise from 3 o'clock. Default 180

`Readonly`leftRightArrow

leftRightArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the height. Default 50

`Readonly`leftRightArrowCallout

leftRightArrowCallout: {
    boxWidth?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxWidth?: number

Width of the box, as a percent of the width. Default 48.123
Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of each arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`leftRightCircularArrow

leftRightCircularArrow: {
    endAngle?: number;
    headAngle?: number;
    headWidth?: number;
    shaftThickness?: number;
    startAngle?: number;
}

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the arrow ends, in degrees clockwise from 3 o'clock. Default 340.961
Optional ReadonlyheadAngle?: number

Angle each arrowhead covers, in degrees. Default 19.039
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyshaftThickness?: number

Thickness of the arrow's body, as a percent of the shorter side. Default 12.5
Optional ReadonlystartAngle?: number

Angle where the arrow starts, in degrees clockwise from 3 o'clock. Default 199.039

`Readonly`leftRightRibbon

leftRightRibbon: {
    endLength?: number;
    thickness?: number;
    verticalOffset?: number;
}

Type Declaration

Optional ReadonlyendLength?: number

Length of the pointed ends, as a percent of the shorter side. Default 50
Optional Readonlythickness?: number

Thickness of the ribbon, as a percent of the height. Default 50
Optional ReadonlyverticalOffset?: number

How far the right half is offset from the left half, as a percent of the height. Default 16.667

`Readonly`leftRightUpArrow

leftRightUpArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of each arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`leftUpArrow

leftUpArrow: {
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of each arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`lineCallout

lineCallout: {
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -38.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`lineCalloutWithAccentBar

lineCalloutWithAccentBar: {
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -38.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`lineCalloutWithBorderAndAccentBar

lineCalloutWithBorderAndAccentBar: {
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -38.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`lineCalloutWithNoBorder

lineCalloutWithNoBorder: {
    lineEndX?: number;
    lineEndY?: number;
    lineStartX?: number;
    lineStartY?: number;
}

Type Declaration

Optional ReadonlylineEndX?: number

End of the callout line, where it points, from the left edge, as a percent of the width. Default -38.333
Optional ReadonlylineEndY?: number

End of the callout line, where it points, from the top edge, as a percent of the height. Default 112.5
Optional ReadonlylineStartX?: number

Start of the callout line, from the left edge, as a percent of the width. Default -8.333
Optional ReadonlylineStartY?: number

Start of the callout line, from the top edge, as a percent of the height. Default 18.75

`Readonly`lShape

lShape: { horizontalArmThickness?: number; verticalArmThickness?: number }

Type Declaration

Optional ReadonlyhorizontalArmThickness?: number

Thickness of the horizontal arm, as a percent of the shorter side. Default 50
Optional ReadonlyverticalArmThickness?: number

Thickness of the vertical arm, as a percent of the shorter side. Default 50

`Readonly`mathDivide

mathDivide: { dotRadius?: number; gap?: number; thickness?: number }

Type Declaration

Optional ReadonlydotRadius?: number

Radius of the dots, as a percent of the height. Default 11.76
Optional Readonlygap?: number

Gap between the bar and each dot, as a percent of the height. Default 5.88
Optional Readonlythickness?: number

Thickness of the bar, as a percent of the height. Default 23.52

`Readonly`mathEqual

mathEqual: { gap?: number; thickness?: number }

Type Declaration

Optional Readonlygap?: number

Gap between the bars, as a percent of the height. Default 11.76
Optional Readonlythickness?: number

Thickness of each bar, as a percent of the height. Default 23.52

`Readonly`mathMinus

mathMinus: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the bar, as a percent of the height. Default 23.52

`Readonly`mathMultiply

mathMultiply: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the strokes, as a percent of the shorter side. Default 23.52

`Readonly`mathNotEqual

mathNotEqual: { gap?: number; slashAngle?: number; thickness?: number }

Type Declaration

Optional Readonlygap?: number

Gap between the bars, as a percent of the height. Default 11.76
Optional ReadonlyslashAngle?: number

Angle of the slash, in degrees. Default 110
Optional Readonlythickness?: number

Thickness of each bar, as a percent of the height. Default 23.52

`Readonly`mathPlus

mathPlus: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the strokes, as a percent of the shorter side. Default 23.52

`Readonly`moon

moon: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the crescent at its widest, as a percent of the shorter side. Default 50

`Readonly`nonIsoscelesTrapezoid

nonIsoscelesTrapezoid: { leftSlant?: number; rightSlant?: number }

Type Declaration

Optional ReadonlyleftSlant?: number

How far in the top-left corner is, as a percent of the shorter side. Default 25
Optional ReadonlyrightSlant?: number

How far in the top-right corner is, as a percent of the shorter side. Default 25

`Readonly`noSymbol

noSymbol: { thickness?: number }

Type Declaration

Optional Readonlythickness?: number

Thickness of the ring and the bar, as a percent of the shorter side. Default 18.75

`Readonly`notchedRightArrow

notchedRightArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the height. Default 50

`Readonly`octagon

octagon: { cornerSize?: number }

Type Declaration

Optional ReadonlycornerSize?: number

Size of the cut corners, as a percent of the shorter side. Default 29.289

`Readonly`parallelogram

parallelogram: { slant?: number }

Type Declaration

Optional Readonlyslant?: number

How far right the top edge is shifted, as a percent of the shorter side. Default 25

`Readonly`pentagonArrow

pentagonArrow: { pointLength?: number }

Type Declaration

Optional ReadonlypointLength?: number

Length of the point, as a percent of the shorter side. Default 50

`Readonly`pie

pie: { endAngle?: number; startAngle?: number }

Type Declaration

Optional ReadonlyendAngle?: number

Angle where the slice ends, in degrees clockwise from 3 o'clock. Default 270
Optional ReadonlystartAngle?: number

Angle where the slice starts, in degrees clockwise from 3 o'clock. Default 0

`Readonly`plaque

plaque: { cornerRadius?: number }

Type Declaration

Optional ReadonlycornerRadius?: number

Radius of the curved-in corners, as a percent of the shorter side. Default 16.667

`Readonly`quadArrow

quadArrow: { headLength?: number; headWidth?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 22.5
Optional ReadonlyheadWidth?: number

Width of each arrowhead, as a percent of the shorter side. Default 45
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 22.5

`Readonly`quadArrowCallout

quadArrowCallout: {
    boxSize?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxSize?: number

Size of the box, as a percent of the width and height. Default 48.123
Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 18.515
Optional ReadonlyheadWidth?: number

Width of each arrowhead, as a percent of the shorter side. Default 37.03
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 18.515

`Readonly`rectangularCallout

rectangularCallout: { pointerX?: number; pointerY?: number }

Type Declaration

Optional ReadonlypointerX?: number

Tip of the pointer, from the centre, as a percent of the width. Negative values are to the left. Default -20.833
Optional ReadonlypointerY?: number

Tip of the pointer, from the centre, as a percent of the height. Negative values are above the centre. Default 62.5

`Readonly`ribbonDown

ribbonDown: { centerWidth?: number; endOffset?: number }

Type Declaration

Optional ReadonlycenterWidth?: number

Width of the centre section, as a percent of the width. Default 50
Optional ReadonlyendOffset?: number

How far the ends are offset from the centre section, as a percent of the height. Default 16.667

`Readonly`ribbonUp

ribbonUp: { centerWidth?: number; endOffset?: number }

Type Declaration

Optional ReadonlycenterWidth?: number

Width of the centre section, as a percent of the width. Default 50
Optional ReadonlyendOffset?: number

How far the ends are offset from the centre section, as a percent of the height. Default 16.667

`Readonly`rightArrow

rightArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the height. Default 50

`Readonly`rightArrowCallout

rightArrowCallout: {
    boxWidth?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxWidth?: number

Width of the box, as a percent of the width. Default 64.977
Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`rightBrace

rightBrace: { curveHeight?: number; pointPosition?: number }

Type Declaration

Optional ReadonlycurveHeight?: number

Height of the curves, as a percent of the shorter side. Default 8.333
Optional ReadonlypointPosition?: number

Where the middle point is, from the top, as a percent of the height. Default 50

`Readonly`rightBracket

rightBracket: { cornerHeight?: number }

Type Declaration

Optional ReadonlycornerHeight?: number

Height of the curved corners, as a percent of the shorter side. Default 8.333

`Readonly`roundedAndSnippedCornersRectangle

roundedAndSnippedCornersRectangle: {
roundedCornerRadius?: number;
snippedCornerSize?: number;
}

Type Declaration

Optional ReadonlyroundedCornerRadius?: number

Radius of the rounded top-left corner, as a percent of the shorter side. Default 16.667
Optional ReadonlysnippedCornerSize?: number

Size of the cut top-right corner, as a percent of the shorter side. Default 16.667

`Readonly`roundedCornerRectangle

roundedCornerRectangle: { cornerRadius?: number }

Type Declaration

Optional ReadonlycornerRadius?: number

Radius of the top-right corner, as a percent of the shorter side. Default 16.667

`Readonly`roundedRectangle

roundedRectangle: { cornerRadius?: number }

Type Declaration

Optional ReadonlycornerRadius?: number

Radius of the corners, as a percent of the shorter side. 50 makes the ends fully round. Default 16.667

`Readonly`roundedRectangularCallout

roundedRectangularCallout: {
    cornerRadius?: number;
    pointerX?: number;
    pointerY?: number;
}

Type Declaration

Optional ReadonlycornerRadius?: number

Radius of the corners, as a percent of the shorter side. Default 16.667
Optional ReadonlypointerX?: number

Tip of the pointer, from the centre, as a percent of the width. Negative values are to the left. Default -20.833
Optional ReadonlypointerY?: number

Tip of the pointer, from the centre, as a percent of the height. Negative values are above the centre. Default 62.5

`Readonly`smileyFace

smileyFace: { smile?: number }

Type Declaration

Optional Readonlysmile?: number

How much the mouth curves, as a percent of the height. Negative values frown. Default 4.653

`Readonly`snippedCornerRectangle

snippedCornerRectangle: { cornerSize?: number }

Type Declaration

Optional ReadonlycornerSize?: number

Size of the cut top-right corner, as a percent of the shorter side. Default 16.667

`Readonly`star10

star10: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 85.066

`Readonly`star12

star12: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 75

`Readonly`star16

star16: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 75

`Readonly`star24

star24: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 75

`Readonly`star32

star32: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 75

`Readonly`star4

star4: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 25

`Readonly`star5

star5: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 38.196

`Readonly`star6

star6: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 57.736

`Readonly`star7

star7: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 69.202

`Readonly`star8

star8: { innerRadius?: number }

Type Declaration

Optional ReadonlyinnerRadius?: number

Radius of the inner points, as a percent of the outer radius. Default 75

`Readonly`stripedRightArrow

stripedRightArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the height. Default 50

`Readonly`sun

sun: { rayLength?: number }

Type Declaration

Optional ReadonlyrayLength?: number

Length of the rays, from the edge to the central disc, as a percent of the width and height. Default 25

`Readonly`swooshArrow

swooshArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 16.667
Optional ReadonlyshaftThickness?: number

Thickness of the shaft where it meets the arrowhead, as a percent of the height. Default 25

`Readonly`teardrop

teardrop: { pointLength?: number }

Type Declaration

Optional ReadonlypointLength?: number

How far the point reaches, as a percent of the distance from the centre to the top-right corner. Default 100

`Readonly`topRoundedCornersRectangle

topRoundedCornersRectangle: {
bottomCornerRadius?: number;
topCornerRadius?: number;
}

Type Declaration

Optional ReadonlybottomCornerRadius?: number

Radius of the bottom corners, as a percent of the shorter side. Default 0
Optional ReadonlytopCornerRadius?: number

Radius of the top corners, as a percent of the shorter side. Default 16.667

`Readonly`topSnippedCornersRectangle

topSnippedCornersRectangle: {
bottomCornerSize?: number;
topCornerSize?: number;
}

Type Declaration

Optional ReadonlybottomCornerSize?: number

Size of the cut bottom corners, as a percent of the shorter side. Default 0
Optional ReadonlytopCornerSize?: number

Size of the cut top corners, as a percent of the shorter side. Default 16.667

`Readonly`trapezoid

trapezoid: { slant?: number }

Type Declaration

Optional Readonlyslant?: number

How far in the top corners are, as a percent of the shorter side. Default 25

`Readonly`triangle

triangle: { apexPosition?: number }

Type Declaration

Optional ReadonlyapexPosition?: number

Where the top point is, from the left edge, as a percent of the width. Default 50

`Readonly`upArrow

upArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the width. Default 50

`Readonly`upArrowCallout

upArrowCallout: {
    boxHeight?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxHeight?: number

Height of the box, as a percent of the height. Default 64.977
Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`upDownArrow

upDownArrow: { headLength?: number; shaftThickness?: number }

Type Declaration

Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the width. Default 50

`Readonly`upDownArrowCallout

upDownArrowCallout: {
    boxHeight?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
}

Type Declaration

Optional ReadonlyboxHeight?: number

Height of the box, as a percent of the height. Default 48.123
Optional ReadonlyheadLength?: number

Length of each arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of each arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25

`Readonly`uTurnArrow

uTurnArrow: {
    bendRadius?: number;
    headLength?: number;
    headWidth?: number;
    shaftThickness?: number;
    tipPosition?: number;
}

Type Declaration

Optional ReadonlybendRadius?: number

Outer radius of the bend, as a percent of the shorter side. Default 43.75
Optional ReadonlyheadLength?: number

Length of the arrowhead, as a percent of the shorter side. Default 25
Optional ReadonlyheadWidth?: number

Width of the arrowhead, as a percent of the shorter side. Default 50
Optional ReadonlyshaftThickness?: number

Thickness of the shaft, as a percent of the shorter side. Default 25
Optional ReadonlytipPosition?: number

How far down the tip of the arrowhead reaches, as a percent of the height. Default 75

`Readonly`verticalScroll

verticalScroll: { rollSize?: number }

Type Declaration

Optional ReadonlyrollSize?: number

Size of the rolled ends, as a percent of the shorter side. Default 12.5

`Readonly`wave

wave: { skew?: number; waveHeight?: number }

Type Declaration

Optional Readonlyskew?: number

Shifts the waves sideways, as a percent of the width, from -10 to 10. Default 0
Optional ReadonlywaveHeight?: number

Height of the waves, as a percent of the height. Default 12.5

Type Alias PresetShapeAdjustments

Public Api

Index

Properties

Properties

Readonlyarc

Type Declaration

Optional ReadonlyendAngle?: number

Optional ReadonlystartAngle?: number

ReadonlybentArrow

Type Declaration

Optional ReadonlybendRadius?: number

Optional ReadonlyheadLength?: number

Optional ReadonlyheadWidth?: number

Optional ReadonlyshaftThickness?: number

ReadonlybentLineCallout

Type Declaration

Optional ReadonlybendX?: number

Optional ReadonlybendY?: number

Optional ReadonlylineEndX?: number

Optional ReadonlylineEndY?: number

Optional ReadonlylineStartX?: number

Optional ReadonlylineStartY?: number

ReadonlybentLineCalloutWithAccentBar

Type Declaration

Optional ReadonlybendX?: number

Optional ReadonlybendY?: number

Optional ReadonlylineEndX?: number

Optional ReadonlylineEndY?: number

Optional ReadonlylineStartX?: number

Optional ReadonlylineStartY?: number

ReadonlybentLineCalloutWithBorderAndAccentBar

Type Declaration

Optional ReadonlybendX?: number

Optional ReadonlybendY?: number

Optional ReadonlylineEndX?: number

Optional ReadonlylineEndY?: number

Optional ReadonlylineStartX?: number

Optional ReadonlylineStartY?: number

ReadonlybentLineCalloutWithNoBorder

Type Declaration

Optional ReadonlybendX?: number

Optional ReadonlybendY?: number

Optional ReadonlylineEndX?: number

Optional ReadonlylineEndY?: number

Optional ReadonlylineStartX?: number

Optional ReadonlylineStartY?: number

ReadonlybentUpArrow

Type Declaration

Optional ReadonlyheadLength?: number

Optional ReadonlyheadWidth?: number

Optional ReadonlyshaftThickness?: number

ReadonlybeveledRectangle

Type Declaration

Optional ReadonlybevelWidth?: number

ReadonlyblockArc

Type Declaration

Optional ReadonlyendAngle?: number

Optional ReadonlystartAngle?: number

Optional Readonlythickness?: number

ReadonlybracePair

Type Declaration

Optional ReadonlycurveRadius?: number

ReadonlybracketPair

Type Declaration

Optional ReadonlycornerRadius?: number

Readonlychevron

Type Declaration

Optional ReadonlypointLength?: number

Readonlychord

Type Declaration

Optional ReadonlyendAngle?: number

Optional ReadonlystartAngle?: number

ReadonlycircularArrow

Type Declaration

Optional ReadonlyendAngle?: number

Optional ReadonlyheadAngle?: number

Optional ReadonlyheadWidth?: number

Optional ReadonlyshaftThickness?: number

Optional ReadonlystartAngle?: number

`Readonly`arc

`Optional` `Readonly`endAngle?: number

`Optional` `Readonly`startAngle?: number

`Readonly`bentArrow

`Optional` `Readonly`bendRadius?: number

`Optional` `Readonly`headLength?: number

`Optional` `Readonly`headWidth?: number

`Optional` `Readonly`shaftThickness?: number

`Readonly`bentLineCallout

`Optional` `Readonly`bendX?: number

`Optional` `Readonly`bendY?: number

`Optional` `Readonly`lineEndX?: number

`Optional` `Readonly`lineEndY?: number

`Optional` `Readonly`lineStartX?: number

`Optional` `Readonly`lineStartY?: number

`Readonly`bentLineCalloutWithAccentBar

`Optional` `Readonly`bendX?: number

`Optional` `Readonly`bendY?: number

`Optional` `Readonly`lineEndX?: number

`Optional` `Readonly`lineEndY?: number

`Optional` `Readonly`lineStartX?: number

`Optional` `Readonly`lineStartY?: number

`Readonly`bentLineCalloutWithBorderAndAccentBar

`Optional` `Readonly`bendX?: number

`Optional` `Readonly`bendY?: number

`Optional` `Readonly`lineEndX?: number

`Optional` `Readonly`lineEndY?: number

`Optional` `Readonly`lineStartX?: number

`Optional` `Readonly`lineStartY?: number

`Readonly`bentLineCalloutWithNoBorder

`Optional` `Readonly`bendX?: number

`Optional` `Readonly`bendY?: number

`Optional` `Readonly`lineEndX?: number

`Optional` `Readonly`lineEndY?: number

`Optional` `Readonly`lineStartX?: number

`Optional` `Readonly`lineStartY?: number

`Readonly`bentUpArrow

`Optional` `Readonly`headLength?: number

`Optional` `Readonly`headWidth?: number

`Optional` `Readonly`shaftThickness?: number

`Readonly`beveledRectangle

`Optional` `Readonly`bevelWidth?: number

`Readonly`blockArc

`Optional` `Readonly`endAngle?: number

`Optional` `Readonly`startAngle?: number

`Optional` `Readonly`thickness?: number

`Readonly`bracePair

`Optional` `Readonly`curveRadius?: number

`Readonly`bracketPair

`Optional` `Readonly`cornerRadius?: number

`Readonly`chevron

`Optional` `Readonly`pointLength?: number

`Readonly`chord

`Optional` `Readonly`endAngle?: number

`Optional` `Readonly`startAngle?: number

`Readonly`circularArrow

`Optional` `Readonly`endAngle?: number

`Optional` `Readonly`headAngle?: number

`Optional` `Readonly`headWidth?: number

`Optional` `Readonly`shaftThickness?: number

`Optional` `Readonly`startAngle?: number

`Readonly`cloudCallout

`Optional` `Readonly`pointerX?: number

`Optional` `Readonly`pointerY?: number

`Readonly`cross

`Optional` `Readonly`cornerSize?: number

`Readonly`cube

`Optional` `Readonly`depth?: number

`Readonly`curvedConnector

`Optional` `Readonly`bendX?: number

`Readonly`curvedConnectorFourBends

`Optional` `Readonly`firstBendX?: number

`Optional` `Readonly`secondBendY?: number

`Optional` `Readonly`thirdBendX?: number

`Readonly`curvedConnectorThreeBends

`Optional` `Readonly`firstBendX?: number

`Optional` `Readonly`secondBendY?: number

`Readonly`curvedDownArrow

`Optional` `Readonly`headLength?: number

`Optional` `Readonly`headWidth?: number